2001 Silverado 4.3 ignition module? (Full Version)

Chevrolet Forum >> Chevy Trucks, Vans & SUV's >> Silverado

2001 Silverado 4.3 ignition module?

  

mikeski -> 2001 Silverado 4.3 ignition module? (1/9/2006 12:26:40 PM)

New to forum... didn't see anything in the search, please help.

my 2001 Silverado 4.3L V6 will not start. It cranks over, the fuel pressures up, but no spark, not a single pop. It showed a slight sign of hesitation the last it ran.

Ignition module?

please send ideas: mikeskiw@gmail.com

thanks,
Mike

  
mswrcr29 -> RE: 2001 Silverado 4.3 ignition module? (1/11/2006 7:09:47 AM)

I had the same issue about 6 mo. ago. I skipped real bad and then popped. It wouldn't refire but would turn over and over. I replaced the ignition coil and it started right up!

mikeski -> RE: 2001 Silverado 4.3 ignition module? (1/14/2006 3:37:47 PM)

Got it running yesterday. The cap and rotor were completely oxidized from sitting for a month without being used. Now I have a spare ignition module to put on e-bay.

eric12345678 -> RE: 2001 Silverado 4.3 ignition module? (2/16/2006 7:21:24 PM)

Hi, Bought a 99 with the 4.3 and it wont start. The guy i bought it from said it was the starter and i just replaced that. Still not starting. I can hear the engine turn over. I think i may have a timing problem? but this truck has been sitting a while too. Where is the cap and rotor for starting?

eric12345678 -> RE: 2001 Silverado 4.3 ignition module? (2/16/2006 7:41:11 PM)

Also does anyone have the fireing order for a 1999 Silverado with a v6? i need to know the block order, looking at it from left to right or anyway anyone knows it, also what is the cap order? Thanks a lot. Eric

  

Page: [1]

Return to Chevrolet Forum home page or view the Full Version of this page.