RE: Can you make heads or tails of this?
Login  | |
|
RE: Can you make heads or tails of this? - 2/25/2007 2:06:34 PM
|
|
|
biglg
Posts: 2166
Joined: 9/3/2006
Status: offline
|
Ok, well hopefully gmgeek may have the pins I need to just add the drain wire to the c3 and c1 connectors. I wonder if they both take the round pins, or if one or the other uses the square style? I know the c1 is the round one, didnt look at the c3? Gmgeek????
If I can get C1 pin 4 and 5 out I will juse GMGeeks complete setup!
If I use the existing setup and just add the drain wire. Can I simply twis one end of the connector to twist the wires???? Explain/define your definition of twisting the wires???
|
|
|
|
|
|
|
|
|
RE: Can you make heads or tails of this? - 3/15/2007 8:54:21 PM
|
|
|
EliteDetailOC
Posts: 19
Joined: 3/13/2007
From: Irvine, CA
Status: offline
|
got my kit from JP today. I twisted the wires they gave me with my handy dewalt. Hooked it all up and no engine noise that everyone is speaking of. Not sure what the deal was with other peoples but mines great. Only problem im trying to deal with now is that my GPS words on the screen have a slash threw it and after 30 mins of having the truck on it wont go away.
|
|
|
|
|
RE: Can you make heads or tails of this? - 3/15/2007 9:07:44 PM
|
|
|
genestoy
Posts: 131
Joined: 2/19/2007
From: Phoenix, AZ
Status: offline
|
Did you have the radio flashed at a dealer yet?
_____________________________
Gene
07 Yukon SLE 4x4 with Nav
07 Malibu LT
|
|
|
|
|
RE: Can you make heads or tails of this? - 3/16/2007 12:21:07 PM
|
|
|
EliteDetailOC
Posts: 19
Joined: 3/13/2007
From: Irvine, CA
Status: offline
|
got my kit from JP for the nav install...I have the voice rec hooked up and.... NO noise! :) whooooo hooo! I do like I would normally for a stereo install and twisted the wires, wrapped them and then connected them. I have no engine noise everyone else is speaking of. Now I need to get set up for the back up camera and im good to go!
|
|
|
|
|
RE: Can you make heads or tails of this? - 3/16/2007 3:25:56 PM
|
|
|
genestoy
Posts: 131
Joined: 2/19/2007
From: Phoenix, AZ
Status: offline
|
Well, you didn't say whether the radio is flashed yet? If not you would not hear any noise as the radio change disables ALL audio until it is flashed. 
_____________________________
Gene
07 Yukon SLE 4x4 with Nav
07 Malibu LT
|
|
|
|
|
RE: Can you make heads or tails of this? - 3/16/2007 6:17:54 PM
|
|
|
EliteDetailOC
Posts: 19
Joined: 3/13/2007
From: Irvine, CA
Status: offline
|
anyone have any suggestions as to where I can mount or how I can mount a back up camera on my 07 avalanche? I cant mount it like I would on my tahoe. I need a camera I can tie into my factory nav with the JP customs wiring...so I guess something with the RCAs to connect to.
|
|
|
|
|
RE: Can you make heads or tails of this? - 3/16/2007 6:32:48 PM
|
|
|
konasmrz
Posts: 217
Joined: 11/9/2006
Status: offline
|
I observed this whining noise today at a dealer on another person's Tahoe. The noise is most noticable with the radio OFF, you can hear the whine increase with acceleration through the speakers. I just happened to be there picking up another keyless remote and overheard the conversation among the service personnel - so I told them where to look for a fix. All they did was reseat the onstar connector and the noise was gone. I should have charged them for one hour.............
|
|
|
|
|
RE: Can you make heads or tails of this? - 3/16/2007 6:34:04 PM
|
|
|
konasmrz
Posts: 217
Joined: 11/9/2006
Status: offline
|
quote:
ORIGINAL: EliteDetailOC
anyone have any suggestions as to where I can mount or how I can mount a back up camera on my 07 avalanche? I cant mount it like I would on my tahoe. I need a camera I can tie into my factory nav with the JP customs wiring...so I guess something with the RCAs to connect to.
look into the factory mount location and see if you can replicate
|
|
|
|
|
RE: Can you make heads or tails of this? - 3/16/2007 6:35:38 PM
|
|
|
EliteDetailOC
Posts: 19
Joined: 3/13/2007
From: Irvine, CA
Status: offline
|
gene...i didnt need it programed as the NAV was brand new.
As for the factory mount location, its in the tailgate handle, dealer wants like 500 bucks for the handle with camera. screw all that.
|
|
|
|
|
RE: Can you make heads or tails of this? - 4/23/2007 9:11:27 AM
|
|
|
mkinder
Posts: 31
Joined: 10/28/2006
Status: offline
|
Ok guys, I have read and stuied every thread on this topic and also ZX's topics....... 
07 Hoe - LT
I have - 15940102 - Which is the new replacement for the 66 model.
The - 15948136 - Which is the read DVD unit..
The - Gen 3 Lock Pick - http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&sspagename=ADME%3AB%3AAAQ%3AUS%3A1&viewitem=&item=200102115703
My question is - 15921872 is the harness that goes from the head unit to the rear DVD, I think? ZX? biglg? TMW??
Maybe it is already in the roof liner???
I think that is the only part I am missing.....
I Cannot WAIT to try this and all of your great help is much appreciated.. MUCH appreciated.
I too will send pictures once I get this sucker going.... I am sure you will hear questions from me before SUCCESS.
Thanks again guys, This forums rocks.
Matt
|
|
|
|
 Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
Chevy Prices
Chevy Forums
Monte Carlo
Corvette
Camaro
Advertising Info
|
Contact Us |
Advertising |
Automotive Directory |
Archive |
About Us |
Link To Us |
Chevy Links |
Legal |
Privacy Policy |
© Chevrolet Forum
Chevrolet Forum .com is not affiliated with or endorsed by Chevrolet Motors Division or General Motors.
|
Printable Version
