|
eddy997 -> RE: My darn headlights (12/24/2006 4:36:29 PM)
|
the adjuster screw for up/down on the headlights is infront of the radiator support under the hood, behind the headlight it's self. it's a long brass colored screw. there is also a crosshare molded into the plastic lens if the headlights. using a tape measure, determine the height of the crosshare on level ground. then while parked 20-30ft from a wall, measure the same distance from the ground as the crosshare on your headlight. mark that location, the middle of the brightest part of your headlight beam (shinning on the wall) should pass through the mark that you just made, if you still get "flassed" then point the headlights down more.
|
|
|
|