Truck Cap Interior Light Wiring

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

Truck Cap Interior Light Wiring

Printable Version

Chevrolet Forums >> Chevy Trucks, Vans & SUV's >> S-10 & Blazer >> Truck Cap Interior Light Wiring

Page: [1]

Message

<< Older Topic Newer Topic >>

Truck Cap Interior Light Wiring - 11/4/2006 7:53:19 PM

KBX500

Posts: 1
Joined: 11/4/2006
Status: offline

I'm hoping that one of you can help me with wiring the interior light of the truck
cap on a 2003 S-10. The shell is the Impulse made by A.R.E., also made about
2003.
The wiring in the cap is is simple, just 2 wires. A red power wire and black ground.
The ground is easy of course, with a factory grounding point on the left rear frame
rail. My concern is the best place to connect the power wire. I found the single blue
wire for the 3rd brake light that Chevy provides, but haven't found the wire for the
cap interior light. Is there a factory supplied power wire for it ?
If not what the best place to take power from ? Something that is fused.
Also, do 2003 S-10s have a LCM (Lighting Control Module) ?
So many vehicles do and I don't want to fry it by tapping into the wrong place.

Thanks in advance for your help.
KBX500