2007 Suburban - trailer brake wiring harness

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

2007 Suburban - trailer brake wiring harness

Printable Version

Chevrolet >> Chevy Trucks, Vans & SUV's >> Suburban >> 2007 Suburban - trailer brake wiring harness

Page: [1]

Message

<< Older Topic Newer Topic >>

2007 Suburban - trailer brake wiring harness - 11/4/2006 6:25:46 PM

j28s

Posts: 5
Joined: 11/4/2006
Status: offline

Have a 2007 Suburban and trying to hook up the trailer brake (note it has a tow package and has the four wires under the dash to hook up).

I hooked up the trailer brake and nothing (note: hooked up to trailer and no power). I disconnected the four wires to the controller from the truck. I checked the readings to each wire with the truck on...checking the red (battery positive) and the white (battery negative) there was no power. Is there something else that needs to be done? the fuses are fine. thanks for the help.

Post #: 1

RE: 2007 Suburban - trailer brake wiring harness - 11/4/2006 11:21:44 PM

Brady

Posts: 15
Joined: 9/24/2006
Status: offline

Search the Tahoe forum, this was talked about a few weeks ago. You need to connect the wire that is located between the UBEC and front fender to a stud located under the cover of the UBEC. You will find the answer there. I will check back here later to see if you found the answer.

(in reply to j28s)

Post #: 2

RE: 2007 Suburban - trailer brake wiring harness - 11/5/2006 10:19:39 PM

j28s

Posts: 5
Joined: 11/4/2006
Status: offline

Thanks for the info. Found the post and it was exactly what I needed. I have everything hooked up and tested and it's good to go. Thanks again!!!

(in reply to Brady)

Post #: 3