Chevy TPI fuel injection (Full Version)

Chevrolet >> Brand Review >> Computer & Fuel Systems

Chevy TPI fuel injection

  

rich -> Chevy TPI fuel injection (10/30/2006 4:22:34 PM)

I have a chevy ZZ4 (350 cu)in my streetrod. It has a tuned port that fits a 85 to 91 camareo. It seems that when I shut the car off it looses fuel pressure. I have to turn the key on three or four times( to get the fuel pump to prime the system).

Anyone got any idea about a bled down valve or something that will keep the pressure up.

Thanks

  
golfer -> RE: Chevy TPI fuel injection (10/30/2006 10:56:44 PM)

Could very well be the pressure regular, I've heard of this happening once before.

rich -> RE: Chevy TPI fuel injection (11/1/2006 8:23:08 PM)

Thanks for the info. Do you know if there is any bleed down (I am not sure that is the right term) valve either the feed or return line that would keep pressure on the system. When I took the return line off there was no pressure.

Rich

golfer -> RE: Chevy TPI fuel injection (11/2/2006 10:07:43 AM)

Unfortunately I don't know your configuration ... the suggestion of the regulator came to mind from someone else who had a very similar situation.

They have a completely different make of automobile but the scenario was very similar.

After driving the vehicle there would be restart issues from no fuel pressure condition. The problem discovered was after shut down the pressure would fall rapidly ( measured at the fuel rail in this case) which was determined to be the regulator. In their case there is check valve associated with the regulator system that was allowing the pressure to bleed down the return line. Their system is located in the fuel tank by the pump.

Hopefully this gives you some insight.

  

Page: [1]

Return to Chevrolet Forum home page or view the Full Version of this page.