vibration

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

vibration

Printable Version

Chevrolet >> Chevy Trucks, Vans & SUV's >> Silverado >> vibration

Page: [1]

Message

<< Older Topic Newer Topic >>

vibration - 10/16/2006 4:47:55 PM

unrealchevy

Posts: 5
Joined: 7/31/2006
Status: offline

hello all just a quick question if anyone can help me. i have a vibration in my 2000 chevy silverado 4 wheel drive 1500 when i have my foot on the gas it vibrates like crazy but soon as i take my foot off the gas it stops vibrating???? anyone help me please?

Post #: 1

RE: vibration - 10/17/2006 7:53:29 AM

Nomad76lj

Posts: 519
Joined: 4/21/2006
Status: offline

it could be a few things bent rim wheel weght nocked off. drive shaft could be any rotating part of the drive train. hard to tell these things without beening in the truck. hope that little bit helps.

_____________________________

if every thing is under control your driving to slow
99 chevy bazer 196 000kms 4.3 v6
02 chevy malibu 65 000kms 3.1 v6
87 chevy 1/2 ton 245 000 kms 305 v8
91 toyota corola 327 000 kms new dirt car!

(in reply to unrealchevy)

Post #: 2

RE: vibration - 10/18/2006 5:12:42 PM

unrealchevy

Posts: 5
Joined: 7/31/2006
Status: offline

if this helps any the vibration happends the most from 55 too 70 thats when it does it the most i changed my universal joints they where a lil bad and that fixed the clunk that i had had but the vibration is still there is there any chance that it could be ny transmission ? it dont have a problem shifting or anything but i am lost ???

(in reply to Nomad76lj)

Post #: 3

RE: vibration - 10/21/2006 7:23:56 AM

BBBTHATROCKS

Posts: 26
Joined: 10/2/2006
Status: offline

I had a similar vibration on my truck when I changed out the u-joints. What caused mine was the drive shaft was 180 degrees out but this is on a long box which has a two piece drive shaft after I flipped it back the vibration stopped. You might want to try and rotate the drive shaft 180 and see if that helps.

(in reply to unrealchevy)

Post #: 4