Notices
General Tech Good at troubleshooting? Have a non-specific issue? Discuss general tech topics here. IF YOUR QUESTION IS SPECIFIC TO A CERTAIN MODEL, IT DOES NOT GO IN THIS SECTION.

Vacuum Diagram Needed

Thread Tools
 
Search this Thread
 
Old May 30th, 2009, 8:16 PM
  #1  
CF Beginner
Thread Starter
 
msest's Avatar
 
Join Date: May 2009
Location: Montana
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Vacuum Diagram Needed

Can someone please direct me to a online vacuum diagram for my 1976 Chevy C-10 4x4 w/400cid. I thought I had a manual with one in it, but I don't.
Can anyone help me please!

Thanks msest
Old May 31st, 2009, 11:44 AM
  #2  
CF Beginner
Thread Starter
 
msest's Avatar
 
Join Date: May 2009
Location: Montana
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Thanks for responding!

Thanks 1Gary for responding but the only link I got was for autozone.com. I went ahead and checked it also and did not find anything also. But I did find out that I have a K-10 not a C-10. Not really sure about that because I used to have a 1978 Blazer and I'm pretty sure it was a K-10. I don't know maybe the K stands for 4x4. Anyhow thanks for responding.

msest
Old May 31st, 2009, 12:04 PM
  #3  
Super Moderator
ROTM Coordinator
 
Mike Sigmond's Avatar
 
Join Date: Apr 2009
Location: Orange County, CA
Posts: 1,828
Likes: 0
Received 1 Like on 1 Post
Default

If no one gets it to you by this evening I will look it up for you. I am heading out for the day.
Old May 31st, 2009, 8:57 PM
  #4  
Super Moderator
ROTM Coordinator
 
Mike Sigmond's Avatar
 
Join Date: Apr 2009
Location: Orange County, CA
Posts: 1,828
Likes: 0
Received 1 Like on 1 Post
Default

Ok, here is what I can provide. There isnt one in my source for the 76 model but I bet the 77 is the same( attachment 1). But I did have the evap diagram (attachment 2) for the 76. I hope this helps. Is there a specific part you are trying to get mapped?
Attached Thumbnails Vacuum Diagram Needed-1977-c10-400-cid-vacuum-diagram.jpg   Vacuum Diagram Needed-1976-c10-400-cid-evap-control-system.jpg  
Old January 25th, 2012, 3:45 PM
  #5  
New User
Awaiting E-mail Confirmation
 
coyote88's Avatar
 
Join Date: Jan 2012
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default 1978 K10 vacuum daigram

I was just running into this ? today with my oldmans chevy that he passed to my son....Would the following digram be the same for the k10 pu..? Thank You..
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bperu224
Tahoe & Suburban
2
July 26th, 2009 6:02 PM
fender
Cobalt
0
December 27th, 2008 10:29 PM
luisvillar
Other
0
September 24th, 2008 12:44 PM
Rob
Engine Building & Overhauling
0
January 21st, 2007 12:41 AM
Rob
Computer, Ignition, & Fuel Systems
0
January 20th, 2007 11:12 PM



Quick Reply: Vacuum Diagram Needed



All times are GMT -5. The time now is 3:54 PM.