bdass
1/20/2007 12:46:59 AM
getting ready to buy a 2k7 tahoe and was told i cant go bigger than 22"s in ca? anybody know what thats about. im trading in my 2k1 yukon that has 23" wheels was planning on swapping the wheels and tires. is it a fitting issue or lovely ca laws. getting a 2wd ltz
thanks for the help
Biggmon
1/20/2007 1:18:36 AM
There is no law in California that will determine the size of your wheel. 24"s and 26"s are very common out here in California.
There is a law about the width (well sort of). The oustide of the tire can not extend beyond the outside of the fender.
NASTY GM
1/20/2007 1:52:06 AM
bdass I roll 24's here in CA with no problems
engine2
1/20/2007 2:28:45 AM
Is it me or does CA have 10X as many laws than any other state?
I have seen 24's, but I would guess 22's would ride a little better.
bdass
1/20/2007 11:04:03 AM
thanks for the help, must be something the dealers cant do, but still legal.
southland310
1/21/2007 1:45:16 AM
Rollin' 24 inches strong out in West Los Angeles, California! No such Law!
Colorado Chief
1/21/2007 2:01:54 AM
Southland, what brand are those wheels?
Colorado Chief
1/21/2007 2:07:26 AM
Southland, do you some other pics of your Hoe?
Colorado Chief
1/21/2007 2:07:56 AM
Sorry, have some other pics of your Hoe?
southland310
1/21/2007 2:12:07 AM
Foose DF6 wrapped around BFGoodrich GForce 305/35/R24
NASTY GM
1/21/2007 2:34:23 AM
southland310 I have the same wheels, except mine are all chrome with black inserts
southland310
1/21/2007 2:43:10 AM
Thats cool, do you have any pictures? Mine came with the chrome inserts and the all the black one as well just incase I wanted to swap them out.
deejayrock
3/16/2007 12:20:54 PM
Southland310,
Hey there,
I was wondering what the specs on the wheel are?
I'm looking at a different set of wheels and like the way yours fits.
Whats the offset, backspacing and width of the wheel?
Here are the specs of the wheel I'm looking at:
WHEEL SPECS
24X10 BLACK
6x5.5 (6x139.7)
25 MM OFFSET
6.48" BACKSPACING
Anyone think I'll have fitment issues?
Thank you for your time, Jay
biglg
3/16/2007 5:10:46 PM
Jay, those should be fine! +25 is close enough IMO. You might get slight rubbing of the fender liner. But that is due to the width of the wheel, not the offset!
southland310
3/16/2007 7:05:28 PM
Dont really know the detailed specs due to the fact that I purchased
the wheels directly from the manufacturing company (MHT Wheels in Orange County
California) and just gave them the info on what type of vehicle they
were going to be going on. Sorry about that!
