blazerman
4/3/2008 4:05:48 PM
My blazer has high milage. First I wanted to know how many quarts of transission fluid will it take to change it? Just to know I am going to drop the pan and put on a new filter not try and get it all out of the torque converter. My next question is I have heard horror stories of changing the transmission fluid at high milage because the fluid has all the clutch material in it. Is this a myth or reality, and should I change my fluid at high milage?
EvansBlue
4/3/2008 5:10:04 PM
No, its very good for it to get rid of that contaminated fluid. If you are dropping the pan, it should take no more than 6 qts. Make sure the metal ring that comes on the end of the filter comes down with the filter when you change it.
blazerman
4/3/2008 7:02:41 PM
How is the best way to get the fluid to the right level on the dip stick? I usually always go under or over.
rabbit0102030
4/4/2008 1:52:25 PM
There is not really an exact science to it.
blazerman
4/5/2008 9:08:07 PM
Oh Okay thanks for the information. Do you know if it will hurt it if it is over or under filled by a little? I am going to try my best to get it perfect but incase.
