Headrest Monitor Install help!!!!!!!!!

Ok guys here is the prolbem. I have a 07 Suburban with the factory DVD  flip down Monitor. I have also installed aftermarket headrest monitors. Ok the DVD controls are in the factory dash receiver. Now the Headrest monitors have the std RCA Audio/Video ends along with a hot and ground wire. I am having a problem finding WHERE and HOW to add these two headrest monitors to the Video system and keep the flip down as well. Thank you for your help.
Michael Williams

check the back of head unit for a aux power output so you can plug your rca's into it ,power and ground are self explained.you will need to buy a y spliter ,this is what i had to do for my headrest.


Thumbnail Image



Thumbnail Image



Thumbnail Image

im sure that you found out by now but just incase you didn't here is the wiring diagram for the FACTORY DVD so you can add more screens to the factory set up. The third connector is the one you need to tap. I did this to mine.

16-Pin Connector C3:

Pin Wire Color Circuit No. Function
1 YE 2059 Auxiliary Audio Left Signal
2 WH 2058 Auxiliary Audio Right Signal
3 L-BU 5826 Left DVD Audio Signal (+)
4 WH 5828 Right DVD Audio Signal (+)
5 OG/BK 5831 Remote Infra Red Signal (+)
6 PK/BK 5844 Video Bright Control
7 D-GN 6975 DVD Video Signal (+)
8 PU 2056 Auxiliary Video High Signal
9 Bare 5345 Drain Wire
10 L-GN/BK 5845 Video Module Signal
11 PU 6979 DVD Audio Common
12 Bare 6980 DVD Audio Shield
13 TN/WH 5830 Remote Infra Red Signal (-)
14 Bare 6976 DVD Video Drain Wire
15 WH/BK 5335 DVD Video Signal (-)
16 Bare 5346 Video Drain Wire

hope this helps

do you have the wiring diagram for the trailblazer factory dvd console? is it the same?
i would like to add audio from it to my aftermarket radio..