ddls1
7/12/2007 6:20:01 PM
One of my dearest friends wants me to change the plugs in her 03 V6 Monte Carlo SS. I've looked for a way to access the back 3 and can't seem to find a way. Please tell me what has to done to accomplish this. I thought my corvette was difficult to work on until I saw this.............help please
ddls1
7/14/2007 6:04:09 PM
OK I'm a little surprised that NOBODY has replied....I'll ask the question elsewhere.
thanks
twizzle12
7/14/2007 10:37:41 PM
i did my 2000 impala when i did lower intake gaskets on it and it was a piece of cake because everything was removed... but that doesn't help you any. but what Ive done in the past on those tough to get at plugs on the back side plugs is to do it from the under side with a long extension and a universal swivel socket. i have also removed the top dog bones and and rocked the motor forward by starting the engine and putting it in gear and slowly giving it gas while holding the brake pedal. there is most likely a safer way to do it but this is how i have done it. good luck!
