jntmless
10/28/2007 1:57:13 PM
OK - I changed the oil in a 2002 suburban, but I'm having trouble resetting the "change engine oil" light. I've tried the 3 presses on the accelerator pedal thing(many times, with variations). Is there something I'm missing? This is a bit frustrating! Any help will be greatly appreciated. Thanks.
Tom
ZX1100F1
10/30/2007 11:07:24 AM
Turn key to full on but do not start engine then immediately press and release the accelerator pedal completely 3 times within a 5 second total interval.
johnboy
11/13/2007 5:03:53 PM
Turn key to on position....do not start the internal combustion engine.. pump gas peddle 3x quickly turn key off ...that wil ldo it . goood luck
ZX1100F1
11/14/2007 11:24:52 AM
quote:
ORIGINAL: johnboy
Turn key to on position....do not start the internal combustion engine.. pump gas peddle 3x quickly turn key off ...that wil ldo it . goood luck
You waited two weeks to post the exact same thing that I did??????
Good job!
Rivernut
11/19/2007 4:55:09 PM
What year did this feature show up?
johnboy
11/23/2007 3:11:16 PM
In reply to mr/mrs. xz1100f1 this person said I replied exactly ashe did ,my 1st grade child saw that my response was different than his! this guy is as bright as a 3 watt light bulb!!! YOU MUST TURN THE KEY OFF!!!
johnboy
11/23/2007 4:21:02 PM
This child was just trying to help a fellow "BURB" owner!!
DAVID L. PAUL
11/23/2007 5:21:58 PM
I KNOW THAT'S WHAT MOST OF US ARE HERE FOR . JUST HAD TO GOUGE A LITTLE
johnboy
11/23/2007 5:36:02 PM
A little fun goes a long way thanks from Johnboy
