305 details.

Im looking for details on a stock 92 tbi 305 engine in a caprice. my pops told me that the stock 305 tbi runs a roller cam but I wanna know for sure. plus I want to know if I can remove the A.I.R pump and put on some headers. thanks everyone...

No it  dont have a roller cam and you can remove the air pump and all the plumming. I did it but i didnt replace my manifolds with headers and i had to plug all the holes in the exhaust manifold  where the steel line went fron the A.I.R. system. I also remover my a/c and replaced it with an aftermarket pully from advanced auto that bolted right in place of a/c pump. I'll get the part number for the belt i used. I just routed the old one and pinched a vise grip on the slack and they matched one up for me.

will removing the a.i.r systems cause the car to act different??

Yes the 305 does have a roller cam.    Removal of the  air pump will not affect the running of the engine, but it will not pass emissions inspections,  it will burn up the catalytic converter. 

I beg to differ on burning out the cat. My 92 chev K2500 truck with 305 tbi came from the factory without a smog pump. It just passed a smog test. That was with a brand new exhaust front to back, including headers, but the cat I removed was the factory original monstrosity, which would have been passing e-tests as long as we've had them here. Some of these trucks came with smog pumps and some didn't, but I don't know what the deciding factor was at the factory. But, a bad or removed O2 sensor will allow too rich a mixture to pass through the cat, causing premature failure of the cat.