IngomarFire21
7/1/2007 6:10:15 PM
The following picture is what I'm going to try to explain, My headlights were working fine, went in to eat, we came back out and when the headlights come on this is what happens, pictured is low beam, only the driver side low shines bright as normal, same if on high beam, only driver side, the remaining three barley burns, keep in mind on one on each side is suppose to burn bright (normal) at one time, so two of these lights should not even be getting power to them. Using an Meter on the passenger side headlight assembly it only gets 11.8v to the harness and 11.3 to the bulb socket, as the driver side gets the full 12v that it should.
Also I have noticed that when the driving light sensor turns on the lights itself, my lights will have a quick strobe effect to them, if the fog lights are on it will also flash them very quickly, afterwards fog lights always shine as normal, but headlights remain messed up.
I have got the schematics from GM on the Power Distribution to check my grounds, but I have no idea where the grounds are located at this time. If anyone has had this problem, or has ANY suggestions on things to try or how to fix, it would be more than Greatly Apreciated!! Thanks in Advance.
