sbredeson
9/5/2006 6:09:06 PM
I have a chey 1985 caprice classic which quit the other day.
I replaced the fuel pump and verified I have fuel pumping to the carb by loosing the bolt that holds the filter in. I still can’t get it to run.
I pulled the distributor and the coil looks fine, the cap and rotor look good.
When I pull a plug and turn it over I do not see any spark. I did verify I have 12 volts going to the coil. Just wonder if the next step is replacing the control module or if there is anything else I should check?
2005 Equinox
10/1/2006 10:23:52 PM
Try a different ignition module. These can and do go. If the coil checks out then this is the next step.
uncle bill
10/2/2006 3:34:59 PM
Go ahead and replace that cap and rotor. The HEI is notorious for problems in that area. Replace the ign. module also.
