xswinnyx
2/22/2006 7:47:09 PM
The 1 and 2 on the blower knob, do not work, but the 3, 4, and 5 work fine. Is this a switch that is totally shot? or can you pull off the plastic knob and shoot it with WD-40 or silicone or something to try to clean it? Can you even pull the knob off without breaking it?
xswinnyx
4/2/2006 2:51:23 PM
In case anyone else has this prob. since it is supposed to be common. It's the blower resistor, under the dash by the blower. It will cost around $40 at a dealer. They say it is a 10 min. job. Not true. It is plastered up against the firewall, and you cannot get the two back screws out. There is no room, at least not in the '03.
